Pages
Posts by category
- Category: custom banner
- Category: Events
- Category: In Memoriam
- Category: Labs
- Category: MEgazine
- Category: Research
- Category: Seminar
- Dry Wear Modeling for Spherical Contact
- Novel methods for measurement and data-driven analysis of nano-avalanches
- Estimation of relative position between objects for robotic insertion of LDOs using classification learning methods
- Conformally Decambered UAV Wings for Vertical Axis Wind Turbine Applications
- Blue Economy Engineering
- Exploring Nanofluidic Structures with Ion Selectivity: Advancing Electrically Driven Ion Transport and Molecule Manipulation
- Molecular basis for surface initiated non-thrombogenic clot formation following viral infection
- Third-order exceptional points and frozen modes in planar elastic laminates
- Nonholonomic dynamics of the dissipative Twistcar vehicle – towards an actuated system with passivity
- Heliostat accurate control methods under shading and blocking
- How mammals solve an unsolvable energetic problem of a planar serial-linkage leg
- Long-time levitation of evaporating droplets
- Synchronized dynamics of elastic walking robots
- Fiber Kinematics in the Near field of Coaxial Jets
- Additive Manufacturing: the Optimal Process Window
- Improving Grain Boundary Mobility in Phase-Field-Crystal Model Using Molecular Dynamics
- Towards an Environmentally Sustainable Future: Cool flames and Novel Combustion Technologies
- Analyzing shock attenuation characteristics of methylcellulose hydrogels using Finite element analysis (FEA)
- Turbulence Estimation: Model-Based to Machine Learning
- Mechanisms of stiffness induced contact guidance
- Instruments and methodologies for studying the electron wind force effect on twin boundaries
- Modeling of Particle Dampers Embedded in Additive-Manufacturing Based Designs
- Multi-contact collisions are surprisingly smooth
- GYROSCOPIC ACTUATION OF A WALKING ROBOT
- Design, Simulation, and Experiments in Push Manipulation of Aggregates and Manipulator Geometry Analysis for Autonomous Construction Site Preparation
- Modulation of High-Frequency Acoustic Waves to Control Low-Frequency Signals
- Particle Formation in Hydrogen Combustion
- Control and unusual dynamics of a Spherical robot with inertial actuation
- The Hydrostatic Buckling of SPM system of fish cages and a design method to prevent it
- Theory of Nutrients Recovery by Capacitive Deionization
- Minimizing indoor infection risks with automotive nanofiltration and with a laminar vertical flow
- Is the use of DTCs rather than conventional controllers justified for low order stable systems with delays?
- Infra-red thermography measurements of the convective heat transfer from a flat surface exposed to a turbulent co-axial impinging jet
- Endo-atmospheric Vector Guidance
- Revisiting Airflows and Aerosol Transport in the Deep Lungs
- A Novel Synergy between Sensing and Energy Scavenging
- Designing Bio-Inspired Robots: The Influence of Actuation Level on Performance
- Dynamic analysis for optimizing tribological performance of ringless piston-cylinder systems
- Ion-Ion Selectivity Mechanisms in Capacitive Deionization
- Biomimetic adhesive films combining the functional principle of different biological systems
- From Robot Uprising to Rise of the Dead – Lessons in Engineering and Biology from a New Type of Active Particles
- Challenges in Cooperative and Automated Vehicles
- Synchronization revisited: standing on the shoulders of Christiaan Huygens”
- A solution to amorphous elasticity and plasticity based on newly discovered topological defects
- Principles of wrinkle patterns in thin solids under confinement
- Microchip Destruction using Thermite: An Evaluation of Effectiveness through Experiments and FEA
- Nano Foam Resonators
- Locomotion dynamics of an underactuated wheeled three-link robot
- Universal alignment in turbulent pair-dispersion
- Modeling Glass Transition in Polymers – New Thoughts about an Old Mystery
- Dynamic Gravity: From a crazy idea to high precision measurements
- Advances in mechanics and modeling of modern soft materials
- Learning Two Sequential Agents for USB Assembly with Position and Orientation Uncertainties via Reinforcement Learning
- Sound Generated by Modern Rotating Machinery – Measurements and Modelling
- Plant roots and robotic arms: how to get the best out of a soft fibre?
- A Discrete Model of Electromomentum Coupling in One Dimensional Materials
- Mechanical Engineering design for harsh marine environment
- Nonlinear dynamics of elastic and magnetic fluid interfaces
- An experimental and numerical investigation of laminated composite structure’s damping capabilities
- Machine Learning tools to integrate Impedance Control and Blind Search for assembly tasks
- Mechanical, thermo-mechanical, and metallurgical comparison between WAAM and bulk SS316L
- Theory of monovalent ion selectivity using capacitive deionization electrodes
- Error-Related Potentials in Response to Haptic and Visual Disturbances to Exoskeleton Operation
- Learning-based object detection and 6D pose estimation from RGB-D images for industrial robotic manipulations
- Identifiability of soft-tissue constitutive parameters from in-vivo indentation and inverse finite element analysis
- Identifiability of soft-tissue constitutive parameters from in-vivo indentation and inverse finite element analysis
- A comparative biomechanical analysis of gait with several foot-ankle offloading devices
- A comparative biomechanical analysis of gait with several foot-ankle offloading devices
- 2D Intermodal targeted energy transfer in MDOF oscillator
- 2D Intermodal targeted energy transfer in MDOF oscillator
- Stubborn and Dead-Zone Redesign for State Observers and Dynamic Output Feedback
- Stubborn and Dead-Zone Redesign for State Observers and Dynamic Output Feedback
- DBD Plasma Actuators for Performance Improvement and Noise Reduction on Rotors
- DBD Plasma Actuators for Performance Improvement and Noise Reduction on Rotors
- Towards Enhanced Social-Physical Human-Robot Interaction
- Towards Enhanced Social-Physical Human-Robot Interaction
- Recurrent Neural Networks For Peg In The Hole Insertions Task
- Recurrent Neural Networks For Peg In The Hole Insertions Task
- Using Insights from Human Motor Control and Robotics to Design Intuitive, Semi-Autonomous Prostheses and Exoskeletons
- Using Insights from Human Motor Control and Robotics to Design Intuitive, Semi-Autonomous Prostheses and Exoskeletons
- Heterogeneous materials: Microstructure-property connections and cross-property relations
- Heterogeneous materials: Microstructure-property connections and cross-property relations
- A new model for gear tooth contact analysis
- A new model for gear tooth contact analysis
- Stability and Transition on a Steady and Impulsively-Started Coandă Cylinder
- Stability and Transition on a Steady and Impulsively-Started Coandă Cylinder
- Preliminary Design Tools for Hydrodynamic aspects of Submerged Impermeable Breakwaters
- Preliminary Design Tools for Hydrodynamic aspects of Submerged Impermeable Breakwaters
- Fluids & Elastic Multi-Stability
- Fluids & Elastic Multi-Stability
- Marangoni-based geometrical low-pass-filter
- Marangoni-based geometrical low-pass-filter
- Encircling exceptional points of Bloch waves: mode conversion and anomalous scattering
- Encircling exceptional points of Bloch waves: mode conversion and anomalous scattering
- A study of brush biopsy for malignant cell detection
- A study of brush biopsy for malignant cell detection
- Global dynamics and Dynamical Integrity Assessment: A new rapid iterative method
- Global dynamics and Dynamical Integrity Assessment: A new rapid iterative method
- Oblique scattering from non-Hermitian optical waveguides
- Oblique scattering from non-Hermitian optical waveguides
- Sustainable Power of Choice
- Sustainable Power of Choice
- cape of two-DOF dynamical system from the potential well
- cape of two-DOF dynamical system from the potential well
- Sound Source Localization, Using Acoustic Intensity Measurement Techniques
- Sound Source Localization, Using Acoustic Intensity Measurement Techniques
- Mechanical properties of nanoporous gold nanoparticles in molecular dynamics simulations
- Mechanical properties of nanoporous gold nanoparticles in molecular dynamics simulations
- Stabilization of self-excited oscillations and chimera states in multibody mechanical networks
- Stabilization of self-excited oscillations and chimera states in multibody mechanical networks
- Electromomentum coupling in piezoelectric metamaterials
- Electromomentum coupling in piezoelectric metamaterials
- From Bio-Compatible to Bio-Rejected: Mechano-chemical surface effects on dental implant rejection
- From Bio-Compatible to Bio-Rejected: Mechano-chemical surface effects on dental implant rejection
- Localization of non-rigid objects in a 3D scene for assembly using learning methods
- Localization of non-rigid objects in a 3D scene for assembly using learning methods
- The mechanical behavior of a chain of bistable springs on an elastic foundation
- The mechanical behavior of a chain of bistable springs on an elastic foundation
- Nanofluidics: surfaces, interfaces, and boundary conditions – a devil’s masterpiece
- Nanofluidics: surfaces, interfaces, and boundary conditions – a devil’s masterpiece
- Personalized haptic systems for able-bodied and prosthetic hand users
- Personalized haptic systems for able-bodied and prosthetic hand users
- Learning robotic policies for assembly tasks with non-co-aligned force/ torque sensor and optional visual sensor
- Learning robotic policies for assembly tasks with non-co-aligned force/ torque sensor and optional visual sensor
- A Novel Direct Gaseous Reformate Injector – Design and Experimental Study
- A Novel Direct Gaseous Reformate Injector – Design and Experimental Study
- Dynamic-Stall-Driven Wind Turbine for High Water-Pressure and Urban Applications
- Dynamic-Stall-Driven Wind Turbine for High Water-Pressure and Urban Applications
- Spin-valley Rashba monolayer laser
- Spin-valley Rashba monolayer laser
- Biophysical basis of mechanical communication in cardiac cell beating
- Biophysical basis of mechanical communication in cardiac cell beating
- Hydrodynamic quantum analogs: from foundations to applications
- Hydrodynamic quantum analogs: from foundations to applications
- In-vitro spermatogenesis in a microfluidic environment and sorting sperm using dielectrophoresis
- In-vitro spermatogenesis in a microfluidic environment and sorting sperm using dielectrophoresis
- Powder Metallurgy based Additive Manufacturing of Shape Memory Alloys
- Powder Metallurgy based Additive Manufacturing of Shape Memory Alloys
- Bifurcations and chimera states in a self-excited inertia wheel double pendulum array
- Bifurcations and chimera states in a self-excited inertia wheel double pendulum array
- Soft Landing using LQ Optimization for Non-Ideal Bodies
- Soft Landing using LQ Optimization for Non-Ideal Bodies
- Producing Green Electricity and Clean Water Simultaneously: Desalination Fuel Cells
- Producing Green Electricity and Clean Water Simultaneously: Desalination Fuel Cells
- Energy absorption in additive manufactured structures: The role of geometry and materials
- Energy absorption in additive manufactured structures: The role of geometry and materials
- A Biomechanical System for Automatic Patient-Specific Foot Ground Reaction Force Regulation- Based on Finite Element Analysis
- A Biomechanical System for Automatic Patient-Specific Foot Ground Reaction Force Regulation- Based on Finite Element Analysis
- Stealth waves in compound piezoelectric structures
- Stealth waves in compound piezoelectric structures
- Computational diagnosis of Diabetic Macular Edema using deep learning techniques on Optical Coherence Tomography data
- Computational diagnosis of Diabetic Macular Edema using deep learning techniques on Optical Coherence Tomography data
- Auto-resonance driving schemes for Coriolis vibratory gyroscopes
- Auto-resonance driving schemes for Coriolis vibratory gyroscopes
- Toward reconfigurable microfluidics: non-uniform electroosmotic flow and photoactuated high-voltage control
- Toward reconfigurable microfluidics: non-uniform electroosmotic flow and photoactuated high-voltage control
- The Effect of Stacking Sequence and Ply Orientation on Damage Evolution in Statically Loaded UD Carbon Epoxy Laminates
- The Effect of Stacking Sequence and Ply Orientation on Damage Evolution in Statically Loaded UD Carbon Epoxy Laminates
- Topology optimization using length scale as a design variable
- Explosive Boiling of Drops Near a Solid Surface and Inside a Turbulent Flow
- GPU Accelerated High-Fidelity Implicit LES of Coanda Cylinder Flow Instabilities
- Structure and Dynamics of Polyelectrolyte Complex Network under Electric Field
- Computational design of ultra-strong high-entropy alloys manufactured via additive manufacturing processes
- Micro-Structural optimization for combined Thermal and Mechanical load-bearing materials
- Development of an External Phase-Shifting Tunable Mechanism in a Miniature PT Cryocooler
- Mechanics on the Great Ice Sheets
- Hydrodynamic Lubrication and Surface Texturing
- Novel External Heat Engine Using Two-Phase Nozzle
- Ultrafast Dynamics of Vibrational Polaritons: Transport against the flow and Vacuum-Field Chemistry
- High-rate phase transformation in shape memory alloys: from small-scale kinetics to actuator design
- Reorientation of cell layers under stretch as an active orthotropic material
- Coandă-based Reciprocating Wind Energy Generator for Water Desalination
- Quantitative Visualization in Mechanics: Challenges and Opportunities
- Mechanics of Cell-Matrix Interactions in Three-Dimensions
- Dynamics and minimalistic control of a flexible structure containing bi-stable elements
- Trainable Materials
- Nonlinear mechanics of thin structures and their applications
- Microstructural and Tensile Properties of AlCrFe2Ni2 High Entropy Alloy
- Thermal Bonding Patterns Affecting Nonwoven Properties: Experiments and Modeling
- 3D Minimum-Time Soft-Landing
- Dynamics and stability of Purcell’s micro swimmer model with flexible joints and/or controlled torque at the joints
- First true realization of Stirling open cycle for solar and waste heat conversion
- Applications of high-speed cineradiography to injury biomechanics and prevention research
- Fluidic Shaping of Optical Components on Earth and in Space
- Kinematics of rigid fibers in a turbulent channel flow
- Multiscale Analyses of Composites Subjected to Quasi-static and High Strain-rate Loading Conditions
- Integrated Thermocatalytic Systems for Generation of Synthetic Fuels from CO2 using Renewable Energy
- Micro-mechanical Tamper Protection Device based on Shape Memory Alloy
- Development of sulfonated porous carbon electrodes for ion selective water purification
- EEG Correlates of errors, disturbances and rare target stimuli, and their applications for brain-computer interfaces
- Dynamics and stability of a planar three-link swimmer with passive visco-elastic joint in ideal fluid
- Towards a solution of an ancient problem: how does the wind create waves?
- An improved analytical description of the response of axisymmetric conical shells exhibiting bistable behavior
- Voids distribution effect on the yield of porous materials
- Spatial dynamics of flexible nano-swimmers under a rotating magnetic field
- Numerical investigation of PMN-PT for twisting actuators
- Computational Method for Modeling of Beam-Like Flexible Systems
- Cavitation and bubble dynamics in aviation fuels
- Non Ionizing Method for Estimating Scoliotic Skeletal Alignment Learned from Anatomical Surface and Structural Data
- Geometry and Material Optimization of Electromagnetic Radiation Absorbers using 3D Printing
- Learning locomotion the easy way
- Electro-orientation and Electro-rotation of Janus particles
- Experimental investigation of spanwise secondary flows in boundary layer flows above vegetation canopies
- Voids growth in liquid lead in spallation
- MODELING AND EXPERIMENTAL INVESTIGATION OF PIEZOELECTRIC ACTUATORS MADE FROM PMN-PT
- Ferromagnetic Polarization for Soft Robotic Actuation: Application in endoscopic retrograde cholangiopancreatography (ERCP)
- Flow rate–pressure drop relation for non-Newtonian fluids in narrow geometries
- Towards micro-mechanic improved design of granular composites
- Stress – Moduli Monotonicity in Heterogeneous Elastic Structures for Improved Design
- Optimization of Motion in Systems with Redundancy
- Pushing boundaries in the theory of water desalination by electrodialysis: cells driven by chemical energy and pH effects
- NON-LINEAR VIBRATIONS OF A THIN CIRCULAR RING
- Hierarchy of exact low-dimensional reductions for populations of coupled oscillators
- Numerical Modeling of Atomization in High-Speed Multi-Phase Flows
- Adaptable canopy-like structure for underwater sensing
- INVESTIGATION OF THE PERFORMANCE CHARACTERISTICS OF A CYLINDRICAL CATALYST IN THE PROCESS OF STEAM REFORMING
- Nonlinear Phenomena in Engineering Systems
- Fusion of CFD and Sensor Observations for Physical Fields Calibration and Reconstruction
- Coordinated UAV Platoons/Formations and Aerial Manipulators
- High-Temperature Solar Thermochemical Processes for Sustainable Fuel Production
- Mechanics of 2-D Arrays of Curved-Beam Bistable Elements
- A feasibility study of a new concept of VLFS
- Nonlinear Dynamics of Cantilevers
- Transient Combustion Control of Internal Combustion Engines Fed with Renewable Fuels
- Post-contact behavior of a compressed fiber inside a tube: experimental and theoretical investigation
- Optimization of a Hydrogen – Bromine Flow Battery
- Analytical analysis of Autoresonance in systems including gyroscopic effects
- Selectivity mechanisms in capacitive deionization
- Flow Visualization Using Optically Active Particles
- Resonance Enhancement Optimization
- Shock attenuation characteristics of aqueous methyl cellulose solutions
- Deposition of particles smaller than 2.5 micron in the human lung acinus
- MECHANICAL COMMUNICATION IN THE SENSORY NERVOUS SYSTEM
- A comprehensive investigation of Electrostatic Micro Resonators
- Development of Desktop Sample Handling Robot Based on Caging Grasps
- Transition to 3D motion in an equivalent mechanical model of nonlinear liquid sloshing
- Elastic Instability and Elastic Waves in a Weakly Perturbed Viscoelastic Channel Flow
- Analytic exploration of safe basins in a benchmark problem of forced escape
- Effect of meso-structure on plastic localization and failure in heterogeneous metallic materials
- System for imaging tympanic membrane vibrations- optic and optomechanical design
- On The Mechanical Behavior of AZ31B Magnesium Alloy Reinforced by SiC Particles
- Hydrogen-Rich Reformate Jet Mixing and Combustion in an ICE Chamber
- Nonlinear Finite Element Analysis of Liquid Sloshing in Upright Circular and Square-base Cylindrical Containers
- Interpreting Averages
- Electroosmotic flow over superhydrophobic surfaces and potential application in lab-on-a-chip applications
- Micro to macro scale modelling of anisotropic heterogeneous materials
- Fabrication of diffractive optical elements by programmable thermocapillary shaping of thin liquid films
- Energy Harvesting from the Human Body for Wearable and Mobile Devices
- The role of Concentrating Solar Energy in the renewable energy transition
- Effect of mechanical properties and surface roughness of soft counter-faces on adhesive behavior of mushroom-shaped biomimetic microstructures
- Kapitza thermal resistance in linear and nonlinear chain models.
- Investigation of an Absorption Heat Transformer (AHT) for temperature boosting of low grade\waste heat
- GPU Accelerated Implicit LES of NACA 0018 Airfoil with Active Flow Control
- Variation Diminishing in Control, Optimization and AI
- Extraction of bounding box dimensions of scanned objects using deep learning methods.
- Control with Intermittent Communication
- Dielectric Barrier Discharge Plasma Flow Control on a Low Aspect Ratio Wing
- Tristability, simulations mode actuation, and limit point behaviour in initially curved coupled micro beams
- Mechanics of the Microcirculation: The Role of Mechanical Forces in Reproduction
- Generalized Kirchhoff law in non-equilibrium conditions
- Supratransport in a vibro-impact oscillatory chain
- MEMS bulk resonators with optimized geometries for mode-matching and mode-ordering
- Self-Motile Synthetic Protocells
- Alternative fuels for clean and efficient internal combustion engines
- Photonic Rashba effect from quantum emitters mediated by a Berry-phase defective photonic crystal
- optimization of cooling power of a miniature Pulse Tube cryocooler by using simulations and new design of all the system’s parts.
- New parameter identification for optimal design of materials and structures
- Experimental Analysis on Liquid Sloshing in Rectangular Containers
- FlowMesher: an automatic unstructured mesh generation algorithm with applications from numerical simulations to designing complex topology structures
- Roughness Toughness Correlation and the effect of particle size and spacing on ductile fracture of metal matrix composite
- R2Gmotion: an IMU-based Approach for Controlling Transradial Prostheses by Learning the Kinematics of Reach-to-Grasp Movement
- Pollen Entrainment and Deposition Characteristics in the Vicinity of Pine Cones
- Experimental Investigation on the Breakup and Transport of Oil Slicks by Breaking Waves
- A new model for radiation validating recent experiments of high temperature photoluminescence, leading to expansion of Kirchhoff law of thermal radiation
- The Mechanical Interaction between Carbon-Nano Tubes and Graphene Sheets
- A Multiple Site-Type Nucleation Model and its Application to the Probabilistic Strength of Pd Nanowires
- Electrical Propulsion and Cargo Transport of Micro-Bowl Shaped Janus Particles
- Stability of Thin Liquid Layers Under Vibrating Forcing
- Reforming-Controlled Compression Ignition – a Novel Concept for Internal Combustion Engines
- Ethics and Uncertainty: An Info-Gap Approach
- Pragmatic Modelling of Annular Two-Phase Flow for Demanding Cooling Applications
- Fluid mechanics of soft robots – Effects of fluid compressibility and elastic multi-stability
- Multiscale Modeling of Shock-induced Plasticity in Body-Centered Cubic Metals
- Aeroelastic instabilities of a chord-wise elastic airfoil
- Increasing Energy Efficiency of Hydraulic Control Systems
- Dielectrophoresis investigation of engineered Janus particles and dynamic capsules
- A theoretical study of Homogeneous Nucleation in Metastable Real Liquid During Intense Boiling
- Obstacle-Aided Locomotion of a Robot Manipulator: Modeling, Path Planning, Simulation, and Experiments
- Microelectromechanical Systems for Mechanobiology
- Enhancing Error Related Potentials Classification Using Data Augmentation
- Moving beyond descriptive fractography
- A Modal Approach for Structural Health Monitoring
- Determination of flowable electrode electric conductivity
- Measuring deep grooves via Auto resonance for parametrically excited nanowires
- The mechanical behavior of a flower-like structure comprised from slender rods subjected bending and torsion
- Polyurea coating as a protective layer against hydrodynamic shockwaves
- Multiscale Modelling of Dislocation Cross-Slip in Face Centered Cubic Metals
- Control of Level Sets from Hamilton-Jacobi PDEs: Experience Versus Theory
- Oscillations of metallic nanowires in molecular dynamics simulations with different thermostats
- Shock attenuation characteristic of methyl cellulose hydrogels
- Surface waves in piezoelectric structures for actuators
- Multi-Vehicle Systems: Deep Reinforcement Learning-Based Control for Automated Driving
- Implementation of Advanced Technologies: Developing the Management Philosophy of the Industry 4.0 Revolution
- Liquid Optical Circuits
- Decomposing and controlling dispersive propagation modes in acoustic-elastic waveguides at low frequencies
- CONTINUUM-COUPLED Microcavity
- Experiments on the interaction between a freely moving sphere and a turbulent boundary layer
- Numerical Simulations of Aerodynamic Flows: Deep Reinforcement Learning for Active Flow Control using High-Order Unstructured Grids and GPU Accelerated Simulations using Meshless Methods
- Chaotic Processing for Fractal Structures: Modeling of Mechanical Alloying for Nanoheater Particulates
- Modeling and control of flexible structures with distributed actuation governed by the wave equation
- Implementation of a Natural Dynamic Controller on an Under-actuated Compass-Biped Robot
- Performance optimization of a UAV engine for high altitude flight conditions
- Fault Detection and wave-control of imperfect cyclic symmetric systems
- A Multiphase, Single Flow and Membraneless Flow Battery Towards next-generation energy storage devices
- Learning Contact Rich Skills Using Coupling Movement Primitives
- Luminescent Solar Power
- Resonance and Energy Transfer in Forced Vibro-Impact Systems with Compliance
- Effect of finite vessel stiffness on transition from two-dimensional liquid sloshing to swirling: reduced-order modeling
- Electrospinning as an Alternative Method for Encapsulation and Preservation of Cells
- Studying deformation processes at high strain rates using a unique under-microscope mechanical pulse system
- Powder Bed Fusion Additive Manufacturing Investigations
- Crack-flaw interactions in fracture under dynamic loading
- Fluidic Shaping of Optical Components
- PERSPECTIVES ON MINIMALISTIC ROBOT HAND DESIGN AND A NEW CAGING-BASED BIOHAZRD SAMPLE HANDLING ROBOT
- Microstructure design and analysis of bio-degradable bone scaffolds
- Energy Infrastructure Model Development for Sustainability of Urban Districts – A Case Study of the Technion Campus in Haifa
- Improving energy efficiency by thermochemical waste-heat recuperation
- Inception and evolution of attached and shear layer intermittent cavitation
- Design of fast boat hull made of composite materials considering hydro-elasticity
- Dimensions Extraction of Objects from Depth Images using Deep Learning Methods
- PERSPECTIVES ON MINIMALISTIC ROBOT HAND DESIGN AND A NEW CLASS OF CAGING-TO-GRASPING ALGORITHMS
- Extrusion-based bio-mimetic Hamiltonian tool path for scaffolds
- A Biodegradable Drug-Eluting Device for Localized Treatment of Bladder Cancer
- Non-uniform electro-osmotic flow: From microscale flow patterning to fluid-structure interaction and instability
- Front Propagation in Bi-Stable Non-Degenerate Systems
- The effect of unfolding kinetics of bi-stable domains on the propagation of mechanical signals in biomaterials
- Non-linear phenomena in the response of bistable chains to impact
- Energy Management in Dynamics and Acoustics Through Nonlinearity
- DISTORTIONAL PLASTICITY FRAMEWORK FOR ADVANCED HIGH STRENGTH STEELS
- Evaluation of the static fracture toughness of advanced ceramics
- DISTORTIONAL PLASTICITY FRAMEWORK FOR ADVANCED HIGH STRENGTH STEELS
- Multicellular Systems Organize as Active Nematic Liquid Crystals
- Tomographic PIV measurements in the wake of a stationary and a tethered sphere undergoing VIV
- Experimental investigation of impact mitigation properties of a thin viscous film
- Using Varying Driving-Force Method to Study Activation Parameters for Nucleation – Application to the Ising Model and nucleation in nanowires
- Elastodynamic metamaterials
- Shape structure coupling of inhomogeneous polymers
- Time resolved, tomographic measurements of oscillatory respiratory flows in an upper airway model
- Soft Materials in Soft Machines
- Fast and Highly Compressible Single- and Multi-Phase Reacting Flows
- Variational approach to brittle fracture: tearing thin sheets and anisotropic surface energy
- Energy Absorption in AM Ti6Al4V Thin Walled Cylinders
- Wave propagation in space-time microstructures: the theory of field patterns
- גלים סוליטריים וגלי הלם בחומרים רכים
- Estimating 3D Objects Orientation using Learning Methods on Point Clouds
- Nonlocal and nonlinear surface plasmon polaritons and plasmon resonance imaging induced by the thermocapillary effect
- Noise Removal in 3D Point Clouds using Deep-Learning Techniques
- Battery Powered Coverage of Planar Environments by an Autonomous Mobile Robot
- Plasma micro cavity
- Predicting Human Motion in Human-Robot Collaborative Tasks using Learning Methods
- Advances in electrochemical systems which combine energy storage and conversion with water desalination
- Feedback-based topological mechanical metamaterials – designing unconventional wave propagation in real-time
- Vignettes from Bio-Inspired Robotics and Dynamical Systems
- Piezoelectric Actuators and Vibrating Energy Harvesters
- Manufacturing engineered materials with ultrasound directed self-assembly
- Active Matter: ‘active thermodynamics’ and the dynamics of biopolymer gels
- Novel Applications of Exceptional Points in Optical, Atomic, and Mechanical Systems
- Irreversible physio-mechanical processes and collagen rearrangements in stretched fetal membranes
- Edge Dislocation Motion in Molecular Dynamics Simulations of Au
- The Effective Mass of Partial Dislocations in Cu
- Micro-Photonics and Nano-Mechanics with Liquids, Gasses, and Plasma
- Caging via Minimalistic Robotic Grasping Systems
- Experimental fluid mechanics research: What’s new at the EMPFL?
- The Mechanical Response of Additively Manufactured Ti6Al4V Specimens Containing Discrete Artificial Voids
- A General Model for Relations between Material Properties and Barriers for Twin Boundary Motion
- High-throughput experimental techniques to measure the CRSS for slip and twinning in Mg and Mg alloys
- Liquid-Mirror Resonator
- Accelerating oscillatory fronts in a chain with nonlocal interactions: effect of linear spectrum
- Crack-flaw interactions in fracture under dynamic loading
- Minimally Invasive, Motion Preserving Artificial Spinal Intervertebral Disc
- Reconciling mechanical and thermomechanical dislocation-based constitutive models
- Microscale flow confinement on surfaces using pressure- and electric- actuation
- Unraveling Damage Processes at the Microstructure
- Optimal control, optimization and asymptotic analysis of simple microswimmer models
- Dimensions Extraction from 3D Scanned Hand Model for Prosthesis Design using Deep-Learning Methods
- Nonholonomic dynamics of the Twistcar vehicle: asymptotic analysis and hybrid dynamics of frictional skidding
- Tailoring nonlinearity for advanced engineering design
- Neuro-inspired control and Neuro-engineering
- Chaotic dynamics and “decision making” in individual chemically active microdrops
- Stabilization of High-Order Flux-Reconstruction Scheme for Wall-Modeled Implicit Large Eddy Simulation
- Autoresonance and Modal Filtering for Fast-Sensing and Actuation
- High-fidelity low-Mach number simulations of reacting flows using accelerated chemistry
- Electrochemical characterization of the transient response of a microchannel-nanoslot fluidic devices
- Unorthodox Inertial Navigation and Sensor Fusion
- Some issues in fracture mechanics of rubber-like and soft materials
- Million times around a microsphere
- Classification, Segmentation, and Geometric Analysis of 3D Point Clouds using Deep Learning
- Innovation, Quality and in between
- Numerical and Experimental Investigation of Arc Plasma Wind Tunnels
- Planning and control for low-cost robotic manufacturing
- Generating an Ideal light source
- Modeling and Analysis of Biomechanical Interfaces
- Assessment of immersed boundary methods for large eddy simulations of thermal-hydraulic turbulent flows
- Creating Complex Deformation Patterns and Increasing Effective Rigidity of Elastic Plates and Beams via Viscous Flows in Complex Internal Channel Networks
- Parametrically excited mechanisms for selective detection, identification and actuation in distributed systems
- Elastic-plastic contact of coated rough surfaces
- Ductile fracture under complex loading scenarios
- Stretch-induced accelerated growth in the sensory nervous system
- Heat transfer and flow field measurements of a pulsating round jet impinging on a flat heated surface
- Exploiting the Somatosensory System with Smart Wearable Devices for the Treatment of Musculoskeletal Joint Pathology
- Waves and Networks
- Malleable matter: Designing disordered metamaterials by natural aging
- Multidimensional topography sensing for frequency modulated AFM
- On application of fractals to tribology
- Nonlinear Resonance in strongly damped systems
- Plantar Pressure and Center of Pressure Curve alterations due to Running Induced Fatigue
- Get in Shape: Cell Shape Is an Independent Repository of Retrievable Information
- Complexity and performance of mechanical systems
- Examination by Tests of the Safety Factor in Solid Propellant Grain Under Ignition Pressure
- Aerodynamic Factors Associated with Rebreathing in Infants
- Physics-based modeling of pressure-driven and current-driven water desalination
- Fractographic Image Analysis Using Computer Vision and Deep Learning Methods
- Light and Capillary Waves Propagation in Water Fibers and Tunable Tweezer controlled Microresonators
- On the band gap universality of multiphase laminates and its applications
- Design Optimization of pediatric Viscous Impeller Pump by Applying Computational Fluid Dynamics
- An Info-Gap Approach to Crack Tip Plastic Zone Shapes
- The New Wave in Robot Grasping
- Dynamics of railway cargo cars
- Fuel reforming for improvement of propulsion efficiency and emissions mitigation
- Measurement of the dynamics of inertial, heavy fibers in isotropic turbulence
- The mechanical behavior of a 2-D lattice of bistable elements
- Mechanics of macromolecules with bistable domains undergoing hard-soft transitions
- Bio-inspired CPG controllers for walking bipedal robots
- Tomographic PIV measurements of the flow field in the wake of a tethered sphere undergoing vortex induced vibrations
- Jamming and Geometry in Epithelial Biology
- On-chip separation and focusing using isotachophoresis with large-volume processing and analyte encapsulation
- TOPOLOGICAL PUMPING IN A MAGNETO-MECHANICAL SYSTEM
- Non-reciprocity in waveguides with essentially nonlinear coupling
- The influence of confining stress on the ballistic properties of soda lime glass
- Escape of dynamical system with multiple degrees of freedom from classical potential well
- High Conductivity Dual Operation Mode Flow Electrode Towards next-generation energy storage devices
- Interfacial Flows Described by Reduced Models
- INVESTIGATION OF INTERSTITIAL FLUID FLOW OF ALVEOLAR PRIMARY SEPTA AFTER PNEUMONECTOMY
- Balancing Flexible Rotors at Low Speed Using Parametric Excitation
- Microscale Flow Patterning by Dynamic Modulation of Surface Charge
- Surface waves in elastic layers of finite thickness, and their relation to mode ordering in resonating disk gyros
- On the Prediction of Diapycnal Mixing in Stably Stratified Turbulence
- Endo-Atmospheric Vector Guidance
- Quasicrystalline multilayered metamaterials: negative refraction and self-similarity of the Bloch-Floquet spectrum
- Performance and nanoparticle emissions of a diesel engine fed with dimethyl-ether
- Spectrally Interleaved Geometric Phase Metasurfaces
- Quantum entanglement of the spin and orbital angular momentum of photons using metamaterials
- Non-Newtonian Flows in Annular Shock-Absorbers
- Dynamics of the 2D oscillator with internal rotatory attachment: effect of geometric nonlinearity
- Research in reduction of vibroacoustic vibration on a payload in an airborne body
- Photo-Luminescence and Thermal Devices for Solar Energy Harvesting
- External phase shifting tuning mechanism in a miniature-pulse tube cryocooler using a semi-active electromagnetic damping system
- Time resolved PIV measurements of the vortex shedding characteristics of stationary rough and smooth spheres in a uniform flow
- Modelling ElastoHydrodynamic Interactions with application to soft robotics, geophysics and biomechanics
- Dynamics of the damped and parametrically driven oscillatory models: Effect of essentially nonlinear coupling
- Nonlinear dynamics of discrete mechanical systems with flat dispersion bands
- Laser-induced graphene fabricated on porous polyethersulfone membranes as electrically active antifouling and antimicrobial filters
- Electrokinetics on paper-based microfluidic devices: development of low-cost and highly sensitive biomolecular diagnostics
- Thermocapillary flow actuation and control
- Experimental investigation of Austenite-Martensite phase boundary motion in shape memory alloys
- INVESTIGATING MOTOR ADAPTATION TO UNSTABLE SHOE DESIGNS THROUGH GAIT BIOMECHANICS AND THE DYNAMICS OF THE CORTICOSPINAL CONTROL
- Barriers, mechanisms of motion, and kinetic laws for twin wall dynamics in ferroic materials
- Photonic spin-controlled metasurfaces
- On-Line Evasive Navigation of an Autonomous Robot in a Planar Unknown Environment
- Liquid/liquid interfaces under electric fields
- 3D-Printable Soft Robotics
- Effect of Hygrothermal Conditions on Strength of Phenolic Composite
- Aerosol Exposure, Bioaerosol Inactivation and Respiratory Protection
- Auto Resonance Based Identification of Natural Frequencies in Rotating Systems
- Measuring the viscoelastic characteristics of a single interface in bio-composite materials via micro-cantilever deformations
- Nanofluidics: observed phenomena, (tentative) explanations and applications
- Some results on the mechanical properties of inverse freezing gels
- Acoustic Levitation – Implementation, Control and Analysis
- Void growth in heavily deformed metals – the effect of local gradients
- Acoustically levitated bearing system and a nonlinear amplifier concept
- Analysis of the hybrid dynamics of a planar rigid body with two frictional contacts near an equilibrium state
- CFD Modeling of a Direct Injection Hydrogen/DME Fueled Internal Combustion Engine
- Electroencephalographic Responses during a Motor Task with Healthy and Stroke Patients
- Variable Compression Ratio Engines – recent development experience and trends
- Developing two-chamber reactor for gasification of biomass, organic waste and poor fossil fuels
- Enhanced cooling of electronic chips using a combined diamond coating and microfluidics
- A Size-dependent Coupled Longitudinal-Transverse Vibration of Nanowires in Molecular Dynamics Simulations
- Dynamics of Solid-Fluid Composite Structures and Actuators
- Application of Hyper-Dual Numbers to the Equations of Motion
- Design and Analysis of the Dynamics of a Propelling Mechanism, Based on Waves Shell in a Medical Syringe
- Kinematics with Applications in Robotics and Biomechanics-Gait Analysis
- The influence of microstructure on the static and dynamic strength of transparent Magnesium Aluminate Spinel (MgAl2O4)
- The exact solution of the 3D vortex compressible Euler equation and Clay Millennium Prize Problem generalization
- Optimization of Control Laws of Dynamic Walking Robots through Region of Attraction
- Machine Learning Tools Facilitate the Tuning of Networks of Matsuoka Oscillators for Controlling Bipedal Walking
- Modeling reverse flow dynamic stall for high advance ratio rotorcraft
- Nonlinear Dynamics and Autonomous Stabilization of a Multi-Tethered Spherical Aerostat in Severe Environmental Conditions
- Novel structures and tunings of optimal modified Dead Time Compensators for low order time delay stable/unstable systems
- Relations Between Material Properties and Barriers for Twin Wall Motion in Ferroic Materials
- Effect of shot-peening mechano-chemical surface treatment parameters on friction reduction
- Dynamics and instabilities of an arbitrarily clamped elastic sheet in potential flow with application to shape-morphing airfoils
- CORRELATING FRACTURE SURFACE ROUGHNESS AND FRACTURE TOUGHNESS UNDER VARYING LOADING RATES
- Theoretical analysis of wheeled three-link snake robot: singularities of nonholonomic constraints and stick-slip hybrid dynamics
- Experimental investigation of Mechano -Chemical Surface Treatment for friction reduction in reciprocal motion
- Development of nonlinear oscillations in a single mode panel flutter
- Escape of a forced-damped particle from a potential well: transient response
- Elastic-mediated mechanical communication between cells
- Impact Time in Vector Guidance
- The Influence of loading conditions, strain hardening, damage evolution and material stress state on the interaction between voids in ductile materials under mode I loading
- Measuring Simplicity in Mechanical Design
- Thermo-mechanical Characterization and Dynamic Failure of Metals
- Assessment of Saint-Venant Principle in Soft Biological Tissues
- EBW and LBW of Additive Manufactured Ti6Al4V Products
- A Laboratory Platform for Dynamic investigation, Simulation and Validation of High-Speed Rotors
- Adaptive Control of Networks of Robotic Manipulators
- Israel Pollak Distinguished Lecture Series 2018 Prof. Jim Hall, Preparing for Catastrophe: Climate-resilient infrastructure systems
- Revealing the mechanobiological and biomechanical nature of obesity
- Hydrodynamics of high-performance marine vessels
- MAGNETO-MECHANICAL TOPOLOGICAL LEGO
- Interference of lattice waves in transport and storage of thermal energy in low-dimensional metamaterials of atomic scale
- The kernel wave perspective: from geophysics to engineering
- STATIC AND DYNAMIC MECHANICAL RESPONSE OF ADDITIVELY MANUFACTURED DISCRETE PATTERNS OF Ti6Al4V
- Beyond Stokes’ law – motion of a sphere in a viscous fluid
- Analytical and semi-analytical approaches applied to the nonlinear mechanical behavior of 3-D structures
- Experimental slowing of flexural waves in dielectric elastomer films by voltage
- Engine Waste Heat Recovery through High-Pressure Methanol Steam Reforming
- Leveraging Human Motor Control Principles for Translational Applications
- Nonlinear dynamics of carbon nanotubes (CNTs)
- Control of ultra-fast autonomous vehicles in dense urban areas
- Mechanobiology of Post Traumatic Knee Osteoarthritis
- Dynamics of viscous thin films interacting with slender elastic media
- Cardiac cell response to action-potential-phase-dependent load
- Slung loads at wind tunnel connected to an unfixed joint
- FORD vision on future of vehicle propulsion
- Mechanical reliability of dental implants
- Rational Approximation of Distributed-Delay Control Laws via Moment-Matching
- Dynamic Spectral Response
- Gaseous viscous peeling of linearly elastic substrates
- Deformation of Single- and Bi-Crystalline Au Nanowires
- Photonic Hyperfine-Structure induced by a Lab Levitating in Air
- Numerical simulations of compressible multicomponent and mulitphase flow using a high-order Targeted ENO (TENO) finite-volume method
- Optical Rashba Effect in Geometric Phase Metasurfaces
- Dynamics of Liquid-filled Column and Truss Structure
- Optimization of a nocturnal radiative cooling system for small scale industrial facilities
- Pulse Tube Cryocoolers Driven by Piezoelectric Devices
- Implementation and Reinforcement Learning of a Gait Controller on a Mono Pedal Robot
- HCCI Combustion in a Wankel Type Internal Combustion Engine
- Numerical modeling of dental implant-bone interface
- Stress-driven grain boundary motion and grain rotation
- Multiscale Simulation of 2D Heterostructures: Incommensurate to Commensurate Transformations in Twisted Graphene Bilayers
- Dynamics of Essentially Nonlinear Mechanical Metamaterials
- Optimal load distribution for maximal sensitivity of local stiffness variations
- A multiscale language for dislocation microstructure for data-driven materials science
- A novel SMA-based experimental system for applying a rectangular stress pulse at the sub-ms time scale
- Constitutive model for describing the mechanical behavior of glassy polymer
- Development of flow electrochemical systems for energy storage and water desalination
- Analysis of the 3 dimensional temperature field around cryoprobes inserted into a malignant tumor
- Morphological and Structural Control during Continuous Nanofiber Nanomanufacturing for Superior Mechanical Properties
- New Investigations of Marangoni-Flow-Driven Self-Propulsion
- Isotachophoretic assays for enhanced biomolecular analysis
- Ductile fracture at the microscale
- Towards Automated and Data-driven Optimized Design of Patient-Specific Biomechanical Interfaces
- Strain Intermittency in Shape memory Alloys
- Recent Advances in Unsteady Low-Speed Experimental Aerodynamics
- Acoustic levitation and propulsion of silicon wafers: accurate positioning and traveling wave based transportation
- 50 years of innovative energy conservation design
- Robot motion planning for multi-agent collaboration in shared workspace
- Knock phenomenon in UAV spark-ignition engines and mitigation strategies
- Cavity Optocapillaries
- Multi-scale Dynamics of Twinning in Ferroic Materials
- External Orthopedic Device for Foot Drop disease
- Electrokinetic actuation of active colloids
- The effect of size and temperature on the nanoindentation
- Mechanics and Chemistry in Designing Polymers
- Seeking simple models for multilegged locomotion: hybrid oscillators, rapid manufacturing, and slippage
- Multiscale modeling and characterization of the biomechanical properties of the bone-implant interface
- Reconstructing oscillator networks from observations
- Topology optimization with curvature constraints using a spline-based representation
- Nonlinear regimes of locally resonant systems
- Computational Nanomechanics – Studying Plasticity from the Atomic Scale
- Universality of the Frequency Spectrum of Laminates
- Turbulent Premixed Flames within the context of a Hydrodynamic Theory
- Self-excited Oscillations, Bifurcations and Chaos in Nonlinear Optomechanical Thermo-Visco-Elastic Panel Resonators
- Passive and semi-active mechanisms of irreversible energy flow in coupled Hertzian models
- A zinc-bromine redox flow battery with fluidized bed electrode
- MICROSCALE ELECTROKINETICS – FROM ENHANCED BIOCHEMICAL ANALYSIS TO CONFIGURABLE MICROSTRUCTURES
- Twin Cavity 2D Trapped Vortex Combustor
- Enhanced mechanical properties of bulk graphene/aluminum composites with a nanolaminated structure
- Hydrodynamic-Structural Analysis for the Design of Flexible Systems for Open Sea Aquaculture
- Bi-stability and multi-stability in structures
- Lame Mode Filled-Gap Resonator
- Electrostatic tuning of band-gaps in soft dielectrics
- New thermodynamics ideas to double solar cell’s efficiency
- Modeling of polymer as a robot
- The Mechanical Response and Phase Transformation Kinetics of NiTi Under Rapid Pulse Heating
- Effect of environmental conditions on the flaming ignition of solid combustibles
- A Pulsed Coandă-Effect Reciprocating Wind Energy Generator
- Dynamics and Synchronization of Mechanically-Coupled Beating Cardiomyocytes
- Phase Change Material Engine for Micro Air Vehicle
- Plastic yield inception of a soft coated sphere compressed by a rigid flat
- MECHANO-RESPONSIVE NANO-TEXTURED HYDROGELS
- Experimental investigation on the various parameters affecting the performance of a water-lubricated bearing
- Making neurosurgery safer: a computer-based approach
- 3D Point Cloud Registration for Localization using a Deep Neural Network Auto-Encoder
- Analysis of stability transitions in a microswimmer with superparamagnetic head
- Suppression of Combustion Instability in Gas Turbine Combustion Chamber
- Optimization And Guidance Of Redundant Systems
- Orders of magnitude hydraulic permeability increase and performance characterization of flow-through desalination electrodes
- Electrokinetic response of elastic surfaces and porous particles to electric fields: from basic principles to applications
- Energy performance analysis of a passive elastic element with a timed clutch for human load carriage
- Dynamics and gait optimization of multi-link swimming robot using “perfect fluid” model
- Smart Micro Structures: Directional Features for Enhancing the Performance of Micro Transducers
- Localization in Finite Vibroimpact Chains: Discrete Breathers, Multibreathers and Asymmetric Discrete Breathers
- Robot for Minimally Invasive Neurosurgery
- Controllable soft structures: from design to fabrication
- The magneto-mechanical response of magnetostrictive composites for stress sensing applications
- The nonlinear dynamics and mechanics of robotic locomotion
- Hemodynamic Navigator – A novel technology for cardiovascular management by engineering principles body-conductivity, Signal processing and Fluid Mechanics
- 3D Bioprinting of cells and tissue analogues
- Heat transfer enhancement in counter-flow-heat-exchanger for use in micro fabricated Joule-Thomson cryocooler
- 2nd Generation Development of a Flexible Track Robot – RoboTrek, for Autonomous Locomotion over High Obstacles
- Stress-Moduli Monotonicity and Optimized Material Morphology
- Investigation of the dynamic tensile behavior of glassy polymers
- Modeling plasticity by non-continuous deformation
- Dynamics of an elastic sphere containing a thin creeping region and immersed in an acoustic region for similar viscous-elastic and acoustic time- and length-scales
- Mechanical Properties of Hollow and Coated Rigid Cylinders at the Nanoscale
- Self-Propagating Miniature Device Based on Shape Memory Alloy
- Towards a Microfluidic Device for Cell Pairing
- Nanoparticle emissions and performance of in-use buses retrofitted with Diesel Particle Filters
- Hip Joint Gait Biomechanics and Efficacy of Foot Center of Pressure Manipulation Employed for the Non-Invasive Treatment of Hip Joint Osteoarthritis
- Experimental investigation on the use of non-focusing nucleic acid probes for sequence-specific detection under isotachophoresis
- Modeling and Evaluating Technion’s Autonomous Underwater Vehicle for Improving Navigation Performance
- The Effect of Geometrical Symmetry Breaking and Advection on Concentration-Polarization Phenomenon in Micro/Nano-Fluidic Devices
- Nonlinear Liquid Sloshing in Partially Filled Tanks: Modeling, Exploration and Mitigation
- Experimental Illustration of Leveraging Internal Viscous Flow to Extend the Capabilities of Beam-Shaped Soft-Actuators
- Solitary waves in nonintegrable lattices
- Electrical System Engineering for a Small Autonomous Underwater Vehicle
- Model of contact and wear between high speed moving parts of piezo-drives
- Non-Rigid Kinematics in Various Biomechanical Applications Using Cosserat Point Theory
- 2D wave manipulation in the acoustic metamaterials with local inertial coupling
- Bi Layered Spherical Contact
- Symmetry breaking in non-linear electrokinetic colloidal transport at the micro/nanoscale
- Development of a Navigation System for a Small Autonomous Underwater Vehicle
- Wide band vibration piezoelectric harvesters
- Level set Strategy for SCFT
- Enhancing the Functionality of Unimorph Piezoelectric Actuators
- Finite Elements simulation of crack propagation from subsurface material defects in rolling contact fatigue
- Elastic-plastic model for a coated sphere compressed by a rigid flat under full stick contact conditions
- Wrist Biomechanics During Dynamic Loading
- Rod and shell-like structures for biomedical applications
- Study of Voltage-Current Characteristics Across the Ignition Gap of Internal Combustion Engines
- Experimental study of the effect of coating thickness and substrate roughness on turning tool’s wear
- The Effects of Body Weight Unloading on Biomechanical Parameters during Overground Walking
- Release mechanism by means of a novel actuator based on shape memory wires subjected to high strain rates
- Interaction Between Two Closely Spaced Waving Elastic Cylinders immersed in a Viscous Fluid
- Nonlinear Dynamics of Thin Liquid Films on Vibrating Surfaces
- Mechanical and Thermodynamic Properties of Electrospun Polystyrene Nanofibers
- Droplet optomechanics
- The mechanics and mathematics of bodies described by implicit constitutive equations
- Investigation of a Thermoacoustic Stirling Engine
- Controlling multiwavelength transmission in optical waveguides and in the atmosphere
- Rotating microfluidics for Mixing and Process Intensification
- Toward Multiscale Material Modeling with Peridynamics
- Monitoring and Stabilizing Arm Tremor of Parkinson’s patients
- Switching between Buckling Modes using Dynamic Excitation
- An Automated Aerial Network for Wildlife Security in Namibia
- Evaluating Complicatedness in Mechanical Design
- Contact Mechanics of Elastomeric O-Ring with Time
- Insightful analysis of the static and dynamic responses of micro-scale electrostatic actuators
- Developing two-chamber reactor for biomass gasification
- Active Vision: From Biokinematics and Animal Behavior to Robotics
- Microscale Modeling of Multiple and Higher-Order Deformation Twinning
- Whispering-gallery-mode resonances in optical spheroidal cavities interacting with a subwavelength particle
- Predictive Maintenance for Flight Safety Components Prone to Severe Uncertainty through Reanalyzing the Challenger Disaster: An Info-Gap Theory Implementation
- Mechanical communication in cardiac cell beating
- Focused upon Hybridization: Rapid and High Sensitivity On-Chip Detection of DNA
- The spatial organization of a two-component lipid bilayer with imposed geometry
- Nanograins Promote Dynamic Shear Localization
- A study on dynamic penetration of layered composite by a metallic projectile
- Dynamics and Control Aspects of Biologically Inspired Walking Biped Robots
- Hyper-Redundant Robotic Arm
- Local Stability Analysis of Hybrid Systems via Saltation Matrix with applications to simple walking and jumping robots
- Modeling the Strength of Nanocubes Using Molecular Dynamics Simulations
- NONLINEAR NORMAL VIBRATION MODES AND THEIR APPLICATIONS IN DYNAMICS OF ELASTIC SYSTEMS
- Performance Predictions of a Coanda-based Reciprocating Wind Energy Generator
- Unsteady Pressure Measurements on Rotor Blades using Fast Pressure-Sensitive Paint
- Powertrain system design and configuration for a PHEV City Bus
- Modeling adiabatic shear failure from energy considerations
- Brenner’s bivelocity fluid mechanics and gradient effects in general continua
- Wind turbine dynamic stall and its control
- A three player Pursuit-Evasion Conflict
- Internal Combustion Engine with thermochemical recuperation fed by Ethanol Steam Reforming products
- Decomposition of waves, stresses & dynamics in rotating disks
- A Method for Optimal Modeling and Design of Dynamic Tests under Constraints
- Investigating the Controlled Dynamics of an Electromagnetically Damped Rotating System
- Theoretical and experimental analyses of AFM array dynamics
- Two-frequency excitation of single-mode Faraday waves
- Intelligent Factories at national and regional level The Italian perspective
- Collective behaviour and spacing of necks in ductile plates subjected to dynamic biaxial loading
- Refraction, Diffraction and Four-wave Mixing from Metasurfaces
- Contact Mechanics of Coatings
- Materials by Design: 3-Dimensional Architected Nanostructured Meta-Materials
- On DISI engine particulate matter formation at cold-fast-idle
- Gas to Gas Microfluidic Heat Exchanger: Axial Conduction and Compressibility Effects
- Nonlinear Electrokinetic Phenomena in Micro and Nano-Fluidics
- Thermo-Mechanical Study of TPU Nano-fibers
- Inlet Guide Vane Separation Control using DBD Plasma Actuators
- Lean, Premixed, Prevaporized Combustion of Liquid Fuels: Technological Challenges and Benefits
- The interrelationship between impact speeds of projectiles and their depth of penetration into metal targets
- Trapping of nano particles in two dimensional nano plasmonic optical lattice
- Fabrication, Characterization, and Implementation of Actuators Based on Thin Shape Memory Alloy Films
- Inertial Langevin dynamics in inhomogeneous media
- Cleaning without “touching”: Artificial modification of surfaces for cavitation research and other applications
- Mechanical Metamaterials
- Experimentally Based Modeling of Human Movement
- The geometry and mechanics of growth and defects in amorphous materials
- The strength of Iron Nanoparticles
- Simulation and test in engineering applications of stereoscopic image processing
- An Info-Gap Approach to allocating intercepting missiles against attacking rockets and missiles
- Joule-Thomson Cryogenic Cooling: Principles and Applications
- Nonlinear Dynamics, Bifurcations and Chaos in Magnetic Resonance Force Microscopy
- Low Order Models for Assessing RANS Models
- Towards a Universal Size-Dependent Strength of FCC Nanoparticles
- High-level verifiable robotics
- Microscale modeling of ductile fracture: Status, Challenges and Opportunities
- Investigation of a passive mechanical mechanism for phase shifting of the flow in a Pulse Tube Cryocooler
- Optimal control of cooperative bilateral teleoperation systems
- A design method for planing hulls, considering hydro-elasticity and nonlinear dynamic structural response
- In Praise of High-Pass Filters
- Dynamics and Motion Control of Miniature Swimmers
- Tweezers controlled resonator
- Interaction between microfluidic droplets in a Hele-Shaw cell:closely spaced droplets and a droplet within a droplet
- Efficient tenfold up-conversion through steady-state non-thermal-equilibrium excitation
- The Collective Effect of a Dislocation Network on their Climb Rate
- Hygromechanical coupling and transverse failure of laminated composites
- Application of Geometric Measure Theory in Continuum Mechanics
- Overlimiting Current in Microchannel-Nanochannel Fluidic Devices
- Parametric Amplification in Electrostatic Resonators
- Development of a minimally invasive, brain-tumor removing robot
- Solitary waves in the Burridge-Knopoff model
- Error related potentials during continuous reaching movements
- Size-selective Analysis of Nanoparticles from Diesel Engine with Fuel Tracing
- Health Monitoring of Aerospace Structural Joints by Dynamic End Effects
- Transport properties of fractured porous media
- Development of Clean Biomimetic Dry Adhesive
- A perspective on water desalination by capacitive deionization
- Microfluidics in the open space: from surface patterning to pathology
- Enhancing the functionality of MEMS actuators by tailoring nonlinear effects
- Finite Element Modeling of Agricultural Tires
- Dynamic behavior of polyurea coated aluminum plates under hydrodynamic loads
- SIMULATION TOOL COUPLING NON-LINEAR ELECTROPHORESIS AND REACTION KINETICS FOR DEVELOPMENT AND OPTIMIZATION OF NEW BIOSENSING ASSAYS
- Modeling and Computational Simulation of Atherosclerosis
- Category: Spotlight
- Category: Spotlight
Home Slide
Members
Members type
Members category
Members role
