דברו איתנו
הפקולטה להנדסת מכונות בטכניון
בוגרי הפקולטה להנדסת מכונות בטכניון כבר השתלבו במגוון תפקידי מפתח בחברות הגדולות במשק הישראלי
מה בפקולטה

לימודים בפקולטה
להנדסת מכונות

רוצה להכיר אותנו מקרוב? זו ההזדמנות שלך להכיר את הפקולטה, את סגל המרצים ואת תכנית הלימודים ממקור ראשון
ספרו לי עוד

מידע למועמדים

כל מה שאתם צריכים לדעת על לימודים בפקולטה להנדסת מכונות בטכניון

מעבדות הפקולטה

חוקרי הפקולטה עובדים על מגוון פיתוחים פורצי דרך בתחומי העולם החדש המדוברים ביותר: רובוטיקה, אנרגיה ירוקה ועוד
לכל המעבדות

ספריית הפקולטה

הספרייה שלנו היא מרחב למידה מודרני ושקט, המציע מגוון אזורי ישיבה, תאורה טבעית ונוף. המקום להפעיל את גלגלי המוח.
לאתר הספרייה

התכנית הבינלאומית

תואר ראשון מלא באנגלית במעבדות מחקר מדעי והוראה ברמה הגבוהה ביותר עם אנשים מכל העולם
עוד על התכנית

משרות פנויות

הפקולטה להנדסת מכונות מגייסת לשורותיה מועמדים מצטיינים בכל הדרגות
להגיש מועמדות
הפקולטה גאה להציג:
המחקר מציג תאוריה מוכללת חדשה להבנת פליטת אור מחומרים מחוץ לשיווי משקל תרמודינמי, עם פוטנציאל ליישומים פוטוניים מתקדמים
ד"ר ליה אנגל מהפקולטה להנדסת מכונות שותפה להישג מדעי משמעותי במיוחד של הטכניון – זכייה במענק מחקר יוקרתי להקמת אחת מתשתיות המיקרוסקופיה המתקדמות מסוגה בעולם
הבחירה ב-European Academy of Sciences, לצד חברותו ב-European Academy of Sciences and Arts וב-Academia Europaea, משקפת את ההכרה הבינלאומית בתרומתו המדעית של פרופ' ריטל

הסיפור שלנו

מאז הקמתה בשנת 1935, משמשת הפקולטה להנדסת מכונות בטכניון בית יוצר למהנדסים המובילים את התעשייה, המחקר והפיתוח של ישראל. בוגריה ממלאים תפקידי מפתח בתעשיות ההיי-טק, הביטחון, הבריאות, האנרגיה, התעופה ועוד. זוהי הפקולטה המובילה בארץ בתחומה ולומדים בה מדי שנה כ-1,000 סטודנטים וסטודנטיות, בהנחיית סגל אקדמי בכיר, מדענים ומומחים מהתעשייה, ובתמיכת צוות מיומן ומקצועי של מהנדסים, טכנאים ואנשי מנהלה.

 

robot
חדשות ואירועים
16 מאי 2026
מחקר מהפקולטה בוחן היווצרות חלקיקים בבעירת מימן ומוקדש לזכר פרופ' מיכאל שפירא ז"ל
10 מאי 2026
מחקר פורץ דרך של פרופ' כרמל רוטשילד מציג תאוריה חדשה להבנת פליטת אור מחומרים זוהרים
13 אפר 2026
סעדיה בהט, ניצול שואה ובוגר הנדסת מכונות בטכניון, נבחר להשיא משואה ביום הזיכרון לשואה ולגבורה ביד ושם
27 ינו 2026
דיקן הפקולטה נפגש עם הסטודנטים שנבחרו למצטייני נשיא לשיחה אישית ומעוררת השראה
סמינרים ואירועים קרובים
א
ב
ג
ד
ה
ו
ש
י
י
י
י
י
י
ש
27
29
30
1
2
3
4
5
6
7
8
9
10
12
13
14
16
17
18
20
21
22
23
24
25
27
28
30
31
11/05/2025
12:30 - 13:30
Location: Dan-Kahn Building, Room 217
The seminar is part of the monthly seminar series, presented in English by graduate students of the Mechanical Engineering Faculty for graduate students. The seminars are scheduled on the first Sunday of the month, 12:30-13:00 (seminar), 13:00-13:30 (lunch).
15/05/2025
13:30 - 14:30
Location: D. Dan and Betty Kahn Building, Room 217
An important direction in novel materials research is the formation of complex fibers with desired properties brought about using composite materials and specific structures and morphologies. Complex polymer fiber formation using the electrospinning method is a surprisingly versatile method that...
19/05/2025
14:30 - 15:30
Location: D. Dan and Betty Kahn Building, Room 217
Many complex fluids are emulsions or dispersions, i.e., multicomponent systems where the “particles” or “droplets” of a dispersed phase are distributed within the continuous-phase matrix. (If the “matrix” is “solid”, we usually talk about “composites” and use composite mechanics models)....
26/05/2025
14:30 - 15:30
Location: D. Dan and Betty Kahn Building, Room 217
Mechanical contacts produce significant changes in equations of motion that are usually modeled as discontinuities. When multiple contacts are likely to be formed, planning typically includes a mode-scheduling step which selects the order of contacts ("modes"), and the computational complexity...
29/05/2025
14:00 - 14:30
Location: D. Dan and Betty Kahn Building, Room 217
The use of Tuned Mass Dampers (TMDs) is a well-established method to reduce vibration in a range of structural systems, from skyscrapers to bridges. These systems are typically designed as single-degree-of-freedom devices, each tuned to reduce a single natural frequency....
Events on 28/04/2025
28/04/2025
14:30 - 15:30
Location: D. Dan and Betty Kahn Building, Room 217
Events on 11/05/2025
11/05/2025
12:30 - 13:30
Location: Dan-Kahn Building, Room 217
The seminar is part of the monthly seminar series, presented in English by graduate students of the Mechanical Engineering Faculty for graduate students. The seminars are scheduled on the first Sunday of the month, 12:30-13:00 (seminar), 13:00-13:30 (lunch).
Events on 15/05/2025
15/05/2025
13:30 - 14:30
Location: D. Dan and Betty Kahn Building, Room 217
An important direction in novel materials research is the formation of complex fibers with desired properties brought about using composite materials and specific structures and morphologies. Complex polymer fiber formation using the electrospinning method is a surprisingly versatile method that...
Events on 19/05/2025
19/05/2025
14:30 - 15:30
Location: D. Dan and Betty Kahn Building, Room 217
Many complex fluids are emulsions or dispersions, i.e., multicomponent systems where the “particles” or “droplets” of a dispersed phase are distributed within the continuous-phase matrix. (If the “matrix” is “solid”, we usually talk about “composites” and use composite mechanics models)....
Events on 26/05/2025
26/05/2025
14:30 - 15:30
Location: D. Dan and Betty Kahn Building, Room 217
Mechanical contacts produce significant changes in equations of motion that are usually modeled as discontinuities. When multiple contacts are likely to be formed, planning typically includes a mode-scheduling step which selects the order of contacts ("modes"), and the computational complexity...
Events on 29/05/2025
29/05/2025
14:00 - 14:30
Location: D. Dan and Betty Kahn Building, Room 217
The use of Tuned Mass Dampers (TMDs) is a well-established method to reduce vibration in a range of structural systems, from skyscrapers to bridges. These systems are typically designed as single-degree-of-freedom devices, each tuned to reduce a single natural frequency....
18/05/2026
Shock waves have been studied for well over a century, and the physics of shock waves forming in steady flows...
18/05/2026
This study presents an experimental investigation of a turbulent flow through an abrupt axisymmetric area contraction in a pipe, focusing...
07/06/2026
Future long-duration space missions will require in-situ, on-demand manufacturing of tools and components. Photopolymer-based processes are attractive for this purpose...
ללמוד מהטובים ביותר!
מסלול 'רעמים' למצטיינים
מסלול 'רעמים' למצטיינים
תכנית "רעמים" לסטודנטים מצטיינים בהנדסת מכונות נועדה לעודד סטודנטים מצטיינים בעלי פוטנציאל גבוה להשתלבות מואצת במחקר ובלימודים לתואר שני ושלישי בפקולטה
מסלול 'ברקים' למצטיינים
מסלול 'ברקים' למצטיינים
תכנית ברקים הינה מסלול למצטיינים במסגרת העתודה האקדמית, שהותאמה במיוחד לעיסוק בנושא מחקר ופיתוח, שהם ליבת העשייה הטכנולוגית של צה"ל
פרויקט הפורמולה
פרויקט הפורמולה
מדי שנה סטודנטים מהפקולטה מתכננים, מהנדסים ובונים דגם חדשני של מכונית המרוץ המגניבה בעולם
כל האופציות פתוחות
כל האופציות פתוחות
הדרך הטובה ביותר לחזות את העתיד היא ליצור אותו. את בוגרי התארים המתקדמים שלנו תמצאו בעמדות הובלה בתעשייה, הן בתחום הפיתוח והייצור והן בתחום המחקר
Technion International
Technion International
The prestigious Mechanical Engineering BSc program at Technion International will prepare you take leading positions in a diverse set of fields
מעוניינים.ות ללמוד את מקצוע העתיד?
הפקולטה להנדסת מכונות, קרית הטכניון, חיפה

"*" אינדוקטור שדות חובה

שדה זה מיועד למטרות אימות ויש להשאיר אותו ללא שינוי.